Re: clutch replacement

[RJohn50603@aol.com]

In a message dated 97-03-21 17:22:34 EST, Rlbbs@aol.com writes:

<< Tony, I would recommend that you replace the throwout bearing when you
 replace the clutch and pressure plate.  The bearing is only a piece of
carbon
 and does wear as quickly as the clutch. >>

Bob, Tony,

A REAL throwout ball bearing is also available in various catalogs. I
recommend them over the stock carbon ones.

R. Johnson - Dallas

'90 Maine Coon
'79 Midget
'76 Midget
'73 MGB