mgs
[Top] [All Lists]

Re: Bolt on Crankshaft Pulley

To: ulix@u.washington.edu
Subject: Re: Bolt on Crankshaft Pulley
From: "Scott Gardner" <gardner@lwcomm.com>
Date: Fri, 10 Oct 1997 21:34:13 +0000
> ...and the size of my steering wheel nut...
> 
> Ulix (the nut behind the wheel)
> 
> 
> On Thu, 9 Oct 1997, Thomas James Pokrefke, III wrote:
> 
> > To the lister who was wondering what size bolt holds the pulley to the
> > front of the crankshaft, the size is 1 5/16".  This is also the same
> > size of the nut that holds the hub to the rear axle on wire wheel cars.

I'm glad to hear the actual, official size is 1-5/16", but in a 
pinch, a 1-3/8" will work with no slippage.  Actually, you don't even 
have to be in a pinch, as I've been using a 1-3/8" for months without 
knowing any better.

Scott
Scott Gardner
gardner@lwcomm.com
www.lwcomm.com/~gardner

<Prev in Thread] Current Thread [Next in Thread>