.....Oops! The correct item# in V.B. catalog is 19, not 18. But, it
is #18 in the Moss Edition MGB-07 (electonic catalog, from the web)
By the way, the decal is on the top of valve cover, not the side.
It is on a raised area, slightly larger than the decal.
Glenn
Glenn Williams wrote:
>
> Blake,
>
> My 70 MGB has only one decal on the valve cover and it's on the
> right side. My engine number is 18GH-WE-H29758, VIN# is
> GHN5UA197861 G. Date stamped on driver door plate is 1/70.
> The sticker can be found in the Victoria British Ltd. MG.35
> catalog on page 52, item 18. The decal reads:
>
> "B.M.C. E.P.A.I. ENGINE EXHAUST EMISSION CONTROL
> FOR MAX EFFICIENCY THESE SETTINGS MUST BE
> MAINTAINED IDLE R.P.M (HOT)-900 R.P.M. IGNITION
> TIMING AT 1000 R.P.M. VACUUM REMOVED 20 B.T.D.C.
> CARBURETTER MIXTURE TO BE ADJUSTED BY AN
> APPROVED SERVICE STATION TO B.M.C. MANUAL"
>
> Hope this helps,
> Glenn Williams
> willga@xtn.net
> Johnson City, TN
>
> 1970 MGB (restore in progress after driving for 20 yrs)
> 1988 RX7-GTU
> 1988 Toyota Camry
> 1995 Mazda 626
> Blake Wylie wrote:
> >
> > One more thing...
> >
> > Could anyone tell me what valve cover stickers were used on 1970 engines?
> > And which sides they were on. This may seems trivial, but I was just
> > wondering. :)
> >
> > Thanks again, :)
> >
> > Blake Wylie
> > 1970 MGB
|