Is it on the right or left raised area? Also, is that from the front
perspective or the rear perspective? :)
heheh...Thanks, :)
Blake
At 08:09 PM 12/22/97 -0500, Glenn Williams wrote:
>.....Oops! The correct item# in V.B. catalog is 19, not 18. But, it
>is #18 in the Moss Edition MGB-07 (electonic catalog, from the web)
>By the way, the decal is on the top of valve cover, not the side.
>It is on a raised area, slightly larger than the decal.
>
>Glenn
>
>Glenn Williams wrote:
>>
>> Blake,
>>
>> My 70 MGB has only one decal on the valve cover and it's on the
>> right side. My engine number is 18GH-WE-H29758, VIN# is
>> GHN5UA197861 G. Date stamped on driver door plate is 1/70.
>> The sticker can be found in the Victoria British Ltd. MG.35
>> catalog on page 52, item 18. The decal reads:
>>
>> "B.M.C. E.P.A.I. ENGINE EXHAUST EMISSION CONTROL
>> FOR MAX EFFICIENCY THESE SETTINGS MUST BE
>> MAINTAINED IDLE R.P.M (HOT)-900 R.P.M. IGNITION
>> TIMING AT 1000 R.P.M. VACUUM REMOVED 20 B.T.D.C.
>> CARBURETTER MIXTURE TO BE ADJUSTED BY AN
>> APPROVED SERVICE STATION TO B.M.C. MANUAL"
>>
>> Hope this helps,
>> Glenn Williams
>> willga@xtn.net
>> Johnson City, TN
>>
>> 1970 MGB (restore in progress after driving for 20 yrs)
>> 1988 RX7-GTU
>> 1988 Toyota Camry
>> 1995 Mazda 626
>> Blake Wylie wrote:
>> >
>> > One more thing...
>> >
>> > Could anyone tell me what valve cover stickers were used on 1970 engines?
>> > And which sides they were on. This may seems trivial, but I was just
>> > wondering. :)
>> >
>> > Thanks again, :)
>> >
>> > Blake Wylie
>> > 1970 MGB
>
>
|