Re: Busted Bolt Extraction

[Richard Peterson <Rich_and_Kerry@compuserve.com>]

Matt, =


I had something similar happen recently.  In my case, there was about 1/8=

inch or so of the old bolt sticking out of the hole with the extractor in=

it.  I used my Dremel tool to cut the bolt flush with the housing while
leaving the screw extractor sticking out 1/8 inch.  In my case it was tha=
t
left just enough to get ahold of with vise grips and I was able to back o=
ut
the extractor.  Hope you are as fortunate as I was.

Rich Peterson