mgs
[Top] [All Lists]

Re: differential problem

To: "Scott Rodabaugh" <srodabau@discover.wright.edu>, <mgs@Autox.Team.Net>
Subject: Re: differential problem
From: "Mike Gigante" <mikeg@vicnet.net.au>
Date: Fri, 16 Oct 1998 07:59:28 -0700
Actually, even though the hole is bigger than a 3/8 ratchet, it works just
fine. I have  a "proper" tool, but have happily and successfully use the
3/8 drive 40 or 50 times (yes I change diffs a *lot*!!!). This is a spridget
but I presume the same is true for the B

Mike

-----Original Message-----
From: Scott Rodabaugh <srodabau@discover.wright.edu>
To: mgs@autox.team.net <mgs@autox.team.net>
Date: Thursday, October 15, 1998 5:45 AM
Subject: differential problem


>
>Hello all,
>
> I would like to change the fluid in the differential of my '70
>Midget but am having trouble removing the plugs.  Both the filler and
>drain plugs have recessed square holes in them that look like they would
>accept a ratchet.  However, the hole is bigger than 3/8" and smaller than
>1/2".  I have checked the local auto parts stores and they carry nothing
>of the sort.  Is there somewhere that one of these can be purchased or is
>there some other creative way of fashioning a tool to remove these plugs?
>
>Thanks.
>
>"If the truth hurts....... distort reality"
>
>Scott Rodabaugh
>Computer Operations Analyst
>Wright State University
>70 Midget
>


<Prev in Thread] Current Thread [Next in Thread>