mgs
[Top] [All Lists]

RE: was ceramic coatings

To: "'john.kahoon@juno.com'" <john.kahoon@juno.com>, mgs@Autox.Team.Net
Subject: RE: was ceramic coatings
From: Fred Cheney <FCheney@kinneyassoc.com>
Date: Wed, 28 Oct 1998 09:10:50 -0500
And it would probally be better to put the wrapper of a straw Inside the
straw since that is the part we want to keep clean ;)

Fred Cheney
'72 MGB

> -----Original Message-----
> From: john.kahoon@juno.com [SMTP:john.kahoon@juno.com]
> Sent: Tuesday, October 27, 1998 6:08 AM
> To:   mgs@autox.team.net
> Subject:      Re: was ceramic coatings
> 
> Ideal would be some sory of White high temp coating INSIDE the header.
> This would cut down on the heat getting to the steel and engine bay.
> The reduced header temp would reduce the thermal cycling and make the
> header
> last longer, and the fringe benfit would be lower engine bay temps.
> Wrapping the header would trap the heat in the header.
> Stainless is the best choice for dealing with the thermal cycles.
> So , white high temp coating inside a stainless header with a, Black
> high
> temp.
> coating on the outside would give you the best possible senerio.
> 
> john.kahoon@juno.com
> 71 midget
> 
> On Tue, 27 Oct 1998 09:22:27 -0800 "Mike Gigante"
> <mikeg@vicnet.net.au>
> writes:
> >The header wrap is very effective (more effective than the coatings) 
> >at
> >reducing engine bay temps.
> >
> >However, if you have mild steel header they'll be rusted out very 
> >quickly.
> >
> >The higher operating temp (of the headers) also appears to cause 
> >cracking
> >of welds/joints.
> >
> >I think that the header wrap would be fine if you have the coatings -
> 
> >the
> >coating will prevent the corrosion problem. Not sure about the 
> >cracking
> >problem.
> >
> >Mike
> >
> >-----Original Message-----
> >From: ENRIQUE CLAURE <span@datacom-bo.net>
> >To: mgs@autox.team.net <mgs@autox.team.net>
> >Date: Monday, October 26, 1998 1:23 PM
> >Subject: was ceramic coatings
> >
> >
> >>Hi folks, as I was reading through the ceramic thread I recall
> seeing 
> >an
> >add
> >>in my Car Craft Magazine of a sort of tape-on cloth that you wrap 
> >your
> >>header with. From what I recall they have real stats on their
> product 
> >and
> >to
> >>me the thick tape seams to REALLY work. I have friends that race and
> 
> >they
> >>swear that you can tell the temp is lower. I will let you know more 
> >about
> >>the product. Enrique
> >>
> >
> >

<Prev in Thread] Current Thread [Next in Thread>