Just remembered something else. My setup has three springs on the
accellerator and only one on the choke.
PaulH.
-----Original Message-----
From: Neil Cotty <neilc@tradesrv.com.au>
>to clear up a couple of things. 1) Got the Accelerator cable hooked up and
>operating nicely - better than before 2) Got the choke cable operating,
>albeit with effort - and it still only operates the fast idle cams and not
>the jets (it doesn't pull out all the way) - not sure if this is right but
>as I remember it, this was the only way my choke used to work in the
>beginning. The cable pulls freely when not connected to the linkage, it's
>these springs that are hampering the operation as far as I can see.
|