john peloquin wrote:
>
> Dear LBC experts,
>
> The air injection tube on my '70B cracked and I have to remove it to get
> it repaired (Since my car is now smog exempt, I wonder why I bother,
> but....) At any rate, I have to plug the holes in my exhaust manifold with
> something- some sort of brass plug fitting I suppose. Does anyone know
> what the appropriate size brass plugs and thread for this application
> might be? I'd really appreciate any help you all might provide.
>
> Thanks.
>
> "Never ascribe to Malice that which can be explained by Ignorance."
> John J. Peloquin, Assistant Research Entomologist
> Entomology, University of California, Riverside, CA 92521
John
Use a 7/16" wrench to remove the four injectors, then plug the
injector holes with 7/16" SAE FINE THREAD bolts (x 1") or allen set
screws.
Rick
|