mgs
[Top] [All Lists]

Re: [Fwd: MG Q&A]

To: "Skye Poier" <skye@ffwd.bc.ca>, "john peloquin" <peloquin@galaxy.ucr.edu>
Subject: Re: [Fwd: MG Q&A]
From: "Paul Hunt" <paul.hunt1@virgin.net>
Date: Fri, 18 Dec 1998 18:55:05 -0000
>5. Refit and fill with lighter oil.

Now that IS thin ...

-----Original Message-----
From: Skye Poier <skye@ffwd.bc.ca>
To: john peloquin <peloquin@galaxy.ucr.edu>
Cc: MG Nuts <mgs@autox.team.net>
Date: 17 December 1998 23:47
Subject: Re: [Fwd: MG Q&A]


>Word on the street is that john peloquin said:
>> How do you replace heavier oil with a lighter one in the dashpots?
>
>1. Unscrew and remove the damper piston/cap from the top of the dashpot.
>   (tool required: fingers)
>2. Undo the three screws holding the dashpot to the piston.
>   (tool required: flathead screwdriver)
>3. Remove dashpot and set aside the spring.  Don't stretch or bend it.
>4. Turn dashpot upside down over your favorite oil recepticle.

>
>Skye
>
>--
>1966 MGB               GHN3L-70307                __,__\__      Finger for
>The MGB Experience     http://www.mgb.bc.ca/     (_o____o_)     PGP key
>


<Prev in Thread] Current Thread [Next in Thread>