mgs
[Top] [All Lists]

Re: Lowering.

To: doddk@mossmotors.com, mgs@Autox.Team.Net
Subject: Re: Lowering.
From: REwald9535@aol.com
Date: Thu, 31 Dec 1998 19:41:25 EST
In a message dated 12/31/98 2:46:11 PM Pacific Standard Time,
doddk@mossmotors.com writes:

> Part of the problem was
>  incorrect installation and misassembled A arms.  The rubber is supposed to
>  bond to the inner and outer surfaces in regular position.  

Proper mechnical procedure says that any and all suspension bushings on any
car should be tightened at normal ride height.  A pain I agree, but it does
make the bushings last longer and work better.
Rick Ewald

<Prev in Thread] Current Thread [Next in Thread>