So the question really is...do I have to line up the holes of the banjo and
the bolt??? I've never heard of this problem, and the Bentley manual shows
them lined up then doesn't mention a thing about it as a consideration.
Never heard anyone talk about bench bleeding the clutch m/c either (only one
cylinder, so...) I've chosen to bench bleed the brake M/C in situ, since I
lack a vice at the house and it seems doable.
>Take a closer look at the banjo. I believe you will find that it
>matters not whether the hole in the bolt has to line up with the
>junction. There should be enough material cut out inside the banjo for
>fluid to find its way out.
>This is the configuration on the banjo connections I've seen on MGs, but
>could be mistaken, of course.