Hi Scott,
I remember very well getting my heater unit from the BGT.
Between the furewall and the unit there is a foam ring.
During the hot years in California where my car came from this foam has
acted as unbelievable strong glue.
I had to take saw in a difficult position in order to separate the heater
unit from the firewall.
The difficult part also is the connected cable - reconnecting of course.
Good luck.
Cheers,
Hans
'71 BGT
> -----Original Message-----
> From: Scott/Michelle [SMTP:mcjsr@talstar.com]
> Sent: Friday, June 25, 1999 7:29 AM
> To: mgs@autox.team.net
> Subject: Heater Core
>
> Hello Listers,
> Thanks in advance for your input on this.
> Ok, this is summer, but the time has come to replace my 75b's heater
> core..
> is this a DIY job, I have a 6 in mechanical ability *and growng* :) on a
> scale of 1-10. What all is involved in this job...any special tools, and
> heads up that I should know????
> Thanks yet again,
>
> Scott Rexford
>
> 75MGB, under going an all too extensive, and expensive overhaul
> 94 Jeep Wrangler,LBC support vehicle extrordinaire**great short haul
> vehicle**
|