mgs
[Top] [All Lists]

Re: Engine installation

To: Rick Brown <mgrick@ptd.net>
Subject: Re: Engine installation
From: John Walker <john@rmartin.net>
Date: Wed, 15 Sep 1999 15:06:11 -0700
You are absolutely correct.
What I really meant was that you have to get it out of the way which your
solution will accomplish without actually removing the hood from the car.

-JW


At 06:11 PM 9/15/99 -0400, Rick Brown wrote:
>John Walker wrote:
>> 
>> Bummer about your wheels. :(
>
>> 2. YES!  Installing or removing an engine without removing the hood would
>> be difficult at best.  Maybe even impossible?
>
>John 
>
>I absolutely disagree with you on this - it is not necessary to remove
>the BONNET to remove the engine.  You just have to tie it back as far as
>you can - placing towels or other rags along the bottom edge - ive done
>it several times.
>
>Rick
>

        John Walker
     john@rmartin.net
     drone@d23.com
     ============
~= Early 1974 MGB =~
     ============
       In Progress :)

<Prev in Thread] Current Thread [Next in Thread>