My diagram shows the o/d override switch also controlling the TCSA. However
the TCSA circuit also has a microswitch and solenoid valve, presumably
closer to the engine. Maybe this microswitch is the third switch your
manual refers to.
PaulH.
-----Original Message-----
From: Peter Schauss <schauss@worldnet.att.net>
To: mgs@autox.team.net <mgs@autox.team.net>
Date: 21 November 1999 02:12
Subject: MGB overdrive questions
>Going over the overdrive which I bought this week
>(thanks to Dave Deutsch ) I have some questions about
>the wiring and operation. There are two switches on
>the box. Checking them with a continuity tester
>I figured out that the one on the right side is for the
>reverse lights and the one on the left is for the
>overdrive. My shop manual makes reference to a third
>switch for transmission controlled spark advance. Is
>there supposed to be such a switch?
>
>The switch which appears to be for the overdrive cutout
>is on only in 4th gear. Is that correct? (My Healey does
>overdrive in both 3rd and 4th, very convenient when the
>traffic on the parkway gets a little thick.)
>
>Thanks,
>
>Peter Schauss
>Long Island, NY
>1963 BJ7
>1980 MGB
>
>BTW, Thanks to everyone who responded with overdrives
>for sale or suggestions as to where I might buy one.
>
>
|