If the distributor drive is installed correctly (big if here) then #1 on the
distributor is the position closest to the #1 cylinder (in the front of the
engine).
The rotor rotates counter clockwise.
The wires need to be long enough to reach????
Larry Hoy
>-----Original Message-----
>From: owner-mgs@autox.team.net [mailto:owner-mgs@autox.team.net]On
>Behalf Of Phillips, Frank
>Sent: Tuesday, July 11, 2000 6:20 AM
>To: 'mgs@autox.team.net'
>Subject: Spark leads
>
>
>Greetings,
>
>A simple question or two about spark plug leads...
>
>1) The shop manual states that the firing order is 1-3-4-2 (I think, book
>not in front of me). How does this translate to position on the
>distributor?
>
>2) How long should each respective wire be?
>
>Thanks...
>
>Frank Phillips
>Email: fwp@ufl.edu
>68 MGB
>
>
|