Jay,
Check your wiring at the second fuse from the bottom on the fuse block.
Assuming all is original this is the fuse that protects the circuit for
the brake lights, turn signals, tach and gages. There may be a bad
connection with a lot of resistance that only shows up with a large load
like when yo uput on the brake lights or turn signals. This is the green
wire circuit. Hope this helps.
Steve Bettencourt
http://www.bmcne.com
webmaster@bmcne.com
On Thu, 26 Oct 2000 14:04:13 EDT ATWEDITOR@aol.com writes:
> Here's the thing. I'm driving along looking at good instrument
> readings.
> Then I either step on the brakes or use the turn signal. First,
> neither
> brake lights or turn signals function; <snip>. Is there a
> common link
> for the instruments and the lighting system somewhere?
>
> Jay Donoghue
> 72B (aka blinky)
> 72B-GT
> 66 Mustang
|