Hi Dave,
I've missed this book some how. Can you give title and maybe ISBN#. I
would like to pick it up. Thanks.
Also for those who have referred to the Moss motors video tape on
carburetors. There is a few mistakes one of which is on the HIF carbs. The
instructor on the tape says to turn the adjustment screw in the side of the
carb CW to lean the mixture and CCW to richen it.
This is incorrect. It should be just the opposite. I have looked at this
several times on my carbs when apart to confirm this. At least on my old,
old tape the instructions are incorrect.
Mark
----- Original Message -----
From: Dave Wood <djw69@idt.net>
To: mgs <mgs@autox.team.net>
Sent: Friday, December 01, 2000 1:19 AM
Subject: Re: 72 MGB-carbs, HIF type
> Dan,
>
> You said that you had soldered the butterfly valves and that rang a bell
in
> the back of my mind. Just went back to Peter Burgess' book and reread
what
> he said about the HIF and the butterfly valve. Apparently the spring
loaded
72 B
|