Do you have to adjusters, one for sand one for air? If so, I would open up
the sand and close the air. If that doesn't work, I took the tip off of the
one I'm using and opened the sand nozzle all of the way and some of the air
nozzle for a few seconds. If that doesn't do it you must have alot of
moisture in the tank, so some how you would need to empty it out.
Wes
-----Original Message-----
From: Chris Chandler [mailto:barak@voyager.net]
Sent: Thursday, May 31, 2001 9:52 PM
To: MG List
Subject: Sand Blasting (almost LBC content)
A couple of years ago I bought a table-top cabinet sandblaster. I used it
for a year or so (it worked wonderfully) and then life got in the way and it
sat for a year...
I went to use it last night and it doesn't appear to be drawing sand into
the pickup tube. I took it apart and checked for blockages and all appears
to be fine (read "I can blow through the pickup tube")... This is really
frustrating. I have a ton of parts to sandblast and paint from scrapping
the '72... is there something stupid I have missed?
Help!
Chris
'70 B Roadster "Ghost"
///
/// mgs@autox.team.net mailing list
/// (If they are dupes, this trailer may also catch them.)
|