However, Bob, a liner, once installed, can (and usually is) bored to
whatever size the other pistons are, so your point is, I'm afraid, not
valid.
Lawrie
BSC
----- Original Message -----
From: Bob Howard <mgbob@juno.com>
To: <fogbro1@home.com>
Cc: <mgs@autox.team.net>; <mg-t@autox.team.net>
Sent: Thursday, July 19, 2001 9:13 AM
Subject: Re: cylinder liners
> Ed,
> I suspect that available liners have an ID of the standard piston size.
> Since the wrench doesn't want to have a std piston in one hole and larger
> pistons in other holes, he wants to line them all for uniformity.
> Bob
///
/// mgs@autox.team.net mailing list
/// (If they are dupes, this trailer may also catch them.)
|