List:
The following data is from Alec Hounslow's copy of the twin cam
"Engineering Technical Data."
**********************************
RADIATOR: DRG. No. ARH.98
TYPE: 4 Row 'B' type, gilled tube, Baked 12 GILLS PER INCH
DIMENTIONS MATRIX: ... Frontal Area 1.35 SQ.FT.
**********************************
AIR INLET: 129.75 sq ins
AREA IN LINE WITH MATRIX: 129.75 sq. ins.
**********************************
There's 144, (12*12), sq. in. per square foot. So the frontal
area of the radiator in sq. in. is 1.35*144= 194.4 sq. in.
That means that the radiator is bigger than the air inlet by
64.65 sq. in. Also the air inlet must serve the heater and carb
hoses. I wonder why we have high engine temperature problems?
Blake
Blake
///
/// mgs@autox.team.net mailing list
/// (If they are dupes, this trailer may also catch them.)
|