mgs
[Top] [All Lists]

Re: Seeking advice on MGB steering rack install

To: "Marc" <smarc@abs.net>
Subject: Re: Seeking advice on MGB steering rack install
From: "Mike Winney" <mgb@cableone.net>
Date: Sun, 24 Mar 2002 11:53:21 -0700
---------------I am having a hard time getting the shaft back into the
u-joint. Any tips on accomplishing this would be appreciated!-------------

I tapped the tapered end of an appropriate sized screwdriver into the
u-joint slot just enough to slightly enlarge the opening which allowed the
shaft to enter the hole.  I then tapped around the u-joint with a ball pean
hammer and the u-joint easily slid into place.  Be sure your shaft(s) are
not burred on the ends.
Mike Winney


----- Original Message -----
From: "Marc" <smarc@abs.net>

///
///  mgs@autox.team.net mailing list
///  or try http://www.team.net/cgi-bin/majorcool
///


<Prev in Thread] Current Thread [Next in Thread>