RE: Dizzy problem

["Maynard Hirsch" <mghirsch@netzero.net>]

Some distributors have an O-ring seal around the shaft to prevent oil from
leaking there.  In your case, the O-ring, over the years, has probably
hardened and beome attached to the block.  I'm afraid that the only choice is
force.  If you can get a small prybar under the distributor plate you might be
able to break it loose.

Maynard

///  or try http://www.team.net/cgi-bin/majorcool
///  Archives at http://www.team.net/archive