Actuator? Although it is a 'pressure failure switch' in the Workshop
Manual.
With no brakes I would imagine one would overshoot corners rather than cut
them ...
----- Original Message -----
From: "Max Heim" <mvheim@attbi.com>
To: "MG List" <mgs@autox.team.net>
Sent: Thursday, October 03, 2002 6:40 PM
Subject: Re: Brake advise needed
> Ok, I give up -- what's a PDWA?
>
> Pressure Differential Warning A_____?
>
> on 10/3/02 9:03 AM, Dodd, Kelvin at doddk@mossmotors.com wrote:
>
> > Don't try to cut corners with the brakes.
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|