Patton,
If you are anywhere near Atlanta, check out this place.
http://www.unpaint.com/ I have taken a lot of stuff there to be
striped. They will strip anything, including the body shell. I
wouldn't recommend that thou. Very cheap for steel, $1.40 @ lb and they
coat the part with a rust inhibitor. Aluminum is more expensive. I
have take a steel and aluminum bonnet, steel was about $20 or so and AL
was over $60.
Check out the results here:
http://projectmgb.phathookups.com/12-27-2002.htm
Scroll to the bottom to see what I have had striped.
Matthew Hale
67 B
http://projectmgb.phathookups.com/
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|