Waringa, Ken wrote:
> Thanks Mike, He is coming home in 2 weeks, so we'll come up with
> something. I jsut figured if I could get the right part I'd try that
> first. Did you just use the inside of the bullet connectors?
>
> Ken
>
Not the bullet connectors, but the male and female components of the big
multiconnectors that are encased with plastic. The pins and the tubes
can be purchased, and soldered and crimped onto your wires, then covered
with heatshrink. It's a little more work than using crimp on style
connectors, but lasts better and is more original. Another option is to
try to find parts of a used harness and splice the wires to fit, which
would look more original. I used to do this with the old main harness
of my car after I replaced it, but then my dad through the old harness away.
Good luck and let me know how it goes.
Mike Jose
79 B
Phoenix
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|