Larry yours is the late system, a mechanical switch. Max's is the early
system, a hydraulic switch.
Larry Hoy
> -----Original Message-----
> From: owner-mgs@autox.team.net
> [mailto:owner-mgs@autox.team.net] On Behalf Of Larry Colen
> Sent: Sunday, June 15, 2003 1:24 PM
> To: Max Heim
> Cc: MG List
> Subject: Re: Brake light question
>
>
> Uh Max, my 1969 MGB has a switch that is mounted to the cover
> for the pedal assembly. If the pedal is all the way out the
> other side of the lever pushes against the switch and opens
> it so that the brake lights are off, when I push on the
> brakes, the switch is allowed to close, turning on the light.
> The pressure sensitive switch is for the brake warning
> circuit, if one side of the circuit gets too much pressure,
> the warning light comes on.
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|