I modified my Eezbleed so I could just connect it to my compressor. I've
found it works wonderfully at 18psi. Never happy using the spare tire
method.
I also have a power vacuum bleeder that works off my compressor but find
that I get air leaking from around the bleed nipple threads and cannot tell
if all the air is out or not.
Safety Fast!
Gordie Bird
62 MGA
80 MGB (sold to a neighbor, so I still get to visit and work on it...and
I'll probably end up getting it back)
>
>
> I like the idea of a pressure gauge. That was one of the things
> I don't like about the Gunson's Eezbleed, if you don't have the spare
> tire pressure down to 20-25, it doesn't do a good job.
>
> I like the control you get with the pump. Half gallon is awful big
> for bleeding though.
>
> Don Malling wrote:
> > Saw this over on shop-talk. Thought it might be of interest.
> >
> > http://www.apexcone.com/Bleeder/bleeder.html
> >
> > Don Malling
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|