Tab Julius wrote:
>
> I didn't have to remove the carb, I just took my screwdriver and
> removed the three screws and unscrewed the black top. As for the
> rest, I will work my through the list - thanks for the comprehensive
> suggestions!
That sounds like you only looked at the suction chamber and piston. I
cannot speak to anything but the HIF, the float chamber is on the very
bottom of the carb, you would need to remove it from the car to open up
and clean.
--
Stephen West-Fisher
Coastal Data Systems
727.418.9774
http://www.coastaldatasystems.com/
|