Re: Cork gasket removal

["James Kleemeyer" <jkk@adams.net>]

Those are 3-M Roloc discs. Be real careful using them, I have a friend that
owns a speed/machine shop and he says that every head he gets that has been
cleaned with a Roloc needs to be resurfaced. They will remove metal along
with the old gasket.

Jim K.


>
> There's available a small wheel with a 1/4" shank that goes into a die
> grinder or high speed drill.  Cordless drills run to slow.  It uses
> Scotch Brite pads and works like a floor scruber.  They aren't really
> expensive.