mgs
[Top] [All Lists]

Re: Oil cooler stainless hose doesn't fit

To: MG List <mgs@autox.team.net>
Subject: Re: Oil cooler stainless hose doesn't fit
From: Max Heim <mvheim@studiolimage.com>
Date: Thu, 01 Jul 2004 11:57:29 -0700
19-row? Is that taller than the radiator? The standard CBB one was 13-row,
so I can see where the hoses may not be long enough. I suppose you could get
another "long" one by buying a second set.

on 7/1/04 11:25 AM, James Schulte at schultejim@msn.com wrote:

> Listers,
> "Somewhere" I read that I should go with a 19 row oil cooler for my 69C
> Roadster. So I 'm trying to install the stainless braided hoses and the
> short one won't fit cause the cooler is to tall. I took out the spacers and
> have it flat on the deck.  I tried all different ways to attach it with no
> luck.  I was thinking maybe the braided hoses have more bulk and a longer
> snout to them. So maybe the rubber ones might fit better. Anyone have
> experience with this?
> TIA
> Jim
> 69C
> 70B
> 


--

Max Heim
'66 MGB GHN3L76149
If you're near Mountain View, CA,
it's the primer red one with chrome wires





<Prev in Thread] Current Thread [Next in Thread>