Good point, this reminds me that I used strips of thin lath with the ends
just tucked between the 'ribs' of the bonnet and its skin to hold the
material in place.
PaulH.
----- Original Message -----
From: "Frank Krajewski" <frankk@intap.net>
To: "Bill Saidel" <saidel@camden.rutgers.edu>
Cc: "MG List" <mgs@autox.team.net>
Sent: Thursday, July 15, 2004 4:16 PM
Subject: Re: Glue for under hood insulation
> Bill; One of the problems I encountered when installing the hood pad set
on
> my 1980 MGB LE was retaining the pads in place as the glue dried...
|