I'm pretty sure I saw them in the latest catalog on
the Supercharger page. I day dream on that page quite
a bit. :-)
Councill, David wrote:
> They are 7/16" fine (20 or 24?). I was unable to locate this size even
> though I live in the largest city in the state (Montana) and we have
> some of the large hardware box stores. So I went ahead and ordered them
> from a Moss reseller as part of another order so the cost was (I think)
> a little under $1 apiece, not much higher than what may be the normal
> hardware price. They weren't listed in the catalog at the time and still
> may not be - Kelvin mentioned the part number on this list and I used
> that, about six months ago I think. So you could contact him or Moss to
> get the part number and order them if you cannot find them locally.
>
> David Councill
> 67 BGT
> 72 B
> dcouncill@msubillings.edu
>
> -----Original Message-----
> From: owner-mgs@autox.team.net [mailto:owner-mgs@autox.team.net] On
> Behalf Of Paul T. Root
> Sent: Monday, September 12, 2005 7:23 AM
> To: RICHARD BOES
> Cc: mgs
> Subject: Re: Blocking Air Rail Ports in Head
>
> Well, they aren't metric.
>
> You can go to a hardware store and get 3/4" allen
> head screws. 3/8" or 7/16" seems to come to mind. And
> fine thread. It's been a couple years since I've done
> it. Someone will know the right size. They are probably
> about 80 cents each.
>
> Also, I believe I saw that Moss carries them now. Somewhere
> around $1.
>
> Or you could go to eBay and pay $10 for the set. :-)
>
--
______ Paul T. Root
/ _ \ 1977 MGB
/ /|| \\
||\/ || _ |
|| || ||
\ ||__//
\______/
|