mgs
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

Re: [Mgs] Temp sender

from [Barney Gaylord] [Permanent Link][Original]
To: Max Heim <max_heim@sbcglobal.net>,MG List <mgs@autox.team.net>
Subject: Re: [Mgs] Temp sender
From: Barney Gaylord <barneymg@mgaguru.com>
Date: Mon, 17 Nov 2008 04:46:20 -0600 
At 05:17 PM 11/16/2008 -0800, Max Heim wrote:
>....
>.... The nut unthreaded all right, but the probe is absolutely 
>stuck. Any suggestions? ....

Remove the thermostat cover and thermostat.  Push and wiggle on the 
end of the sensor bulb inside, which is much more rugged than the 
small tube with wire wrap shield.

Barney Gaylord
1958 MGA with an attitude
http://MGAguru.com
_______________________________________________
Support Team.Net  http://www.team.net/donate.html




Mgs@autox.team.net
http://autox.team.net/mailman/listinfo/mgs

http://www.team.net/archive
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  Re: [Mgs] Temp sender, Paul Hunt
Next by Date:  Re: [Mgs] Temp sender, Paul Hunt
Previous by Thread:  Re: [Mgs] Temp sender, Paul Hunt
Next by Thread:  Re: [Mgs] Temp sender, Paul Hunt
Indexes:  [Date] [Thread] [Top] [All Lists]