>It's been a long time since I have messed with MGA or MGB calipers, but . . .
Easiest way to get the pistons to go inward is to use a small c-clamp which
you can get at a hardware store. Use a 1/2 inch or so socket as a spacer
inside the recess of the piston. With the clamp, you can push the piston
inward easily. Not sure if this relates to MGAs, but it sure works on
Bs. Been too long since I did anything on MGA brakes to remember if the
front disc assembly is similar to MGBs.
Don Scott
1962 MGA Mk II
2001 Miata
1973 MGB GT (for sale)
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Mgs@autox.team.net
http://autox.team.net/mailman/listinfo/mgs
http://www.team.net/archive
|