Craig, working from under the car, loosen the hose from the slave
cylinder first . unbolt the slave from the side of the transmission,
now remove the hose from the slave. unbolt the hose from the body
fitting . Installation is the rev
except you need to bleed the system last.
paul
>Hi Group,
>
>I have to replace my clutch flex lineon my 1973 MG and I have
>misplaced my workshop manual.
>
>Can anyone give me any suggestions on how to remove it?
>
>Thanks,
>
>Craig
>_______________________________________________
>
>Support Team.Net http://www.team.net/donate.html
>
>Mgs@autox.team.net
>http://autox.team.net/mailman/listinfo/mgs
>
>http://www.team.net/archive
--
Paul Osborne
University of Rochester
Engineering & Technical Services
Department of Electrical and Computer Engineering
201 Hopeman Bldg River Campus
Rochester, New York 14627
585-275-5226
paul@ece.rochester.edu
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Mgs@autox.team.net
http://autox.team.net/mailman/listinfo/mgs
http://www.team.net/archive
|