On Mar 28, 2011, at 12:58 AM, Paul Hunt wrote:
> 160 and 180 are about 1/4" apart on the temp gauge. If your gauge never or
barely got off the end-stop then the stat that is in is faulty, pure and
simple. I agree that changing to a 'summer' stat is pointless, in most MGBs
the stat will be fully open anyway regardless of its value.
Eep! So it's not the thermostat after all.
I pulled it tonight and it says "88*" on the side. Since it's a german brand,
I assumed 88C, which is 190F. Using the pan-o-water testing method, I
verified it opened at 86C and closed correctly too.
I noted that when I put the coolant back in, it wasn't quite reaching the top
of the core, so I added some more. Maybe a pint, probably less. Would this
be enough to cause erratic readings? I'll be doing the "drive some, stop and
check temp, drive some more, repeat" process soon enough. Glad I have that
infrared thermometer!
--
Aaron
_______________________________________________
Mgs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|