---------- Original Message ----------
From: "Hans Duinhoven" <h.duinhoven@planet.nl>
To: <mgs@autox.team.net>
Subject: [Mgs] Leaky clutch hydraulics
Date: Tue, 1 Nov 2011 19:26:46 +0100
Hans,
It can be done with starter in place. There is not much room to turn a
wrench, so disconnect the cable at the battery before anything else.
Even if the hose seems OK, replace it while doing the job, and connect the
hose to the cylinder before bolting up the cylinder.
Bob
Dear list,
Last sunday the clutch hydraulics failed.
The fluid cannister was emptied by a leak somewhere down.
As the weather becomes colder, I want to do the job with the least of
efforts.
So my question is: can I get near the slave cylinder and the flex hydraulic
hose for troubleshooting and work without taking the starter motor out of
the BGT?
Thanks for thinking with me.
Cheers,
Hans
71 BGT
_______________________________________________
Mgs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe: http://autox.team.net/mailman/options/mgs/mgbob@juno.com
_______________________________________________
Mgs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|