oletrucks
[Top] [All Lists]

Re: [oletrucks] Saginaw 4-speed problems.

To: antonio@tijerino.net, oletrucks@autox.team.net
Subject: Re: [oletrucks] Saginaw 4-speed problems.
From: "chuck clark" <cachomeimp@hotmail.com>
Date: Sun, 11 May 2003 21:54:04 -0400
I too have had a lot of problems with my Patrick's shifter.  He even sent me 
a new one and I have had problems with that one as well, but not as bad.

They are really sensitive to proper setup as someone else has already 
commented on.  Take all the linkage arms off of the shifter end.  Line up 
the shifter in neutral and put a philips head screwdriver (they have round 
shaft) into hole at top of shift arms to align them.  The ajust and attach 
shift rods.

My current problem, even after having aligned it properly (many times), is 
that comming out of reverse, the shifter does not want to release completely 
the reverse arm while it is going into 1st.  Consequently, the shifter hangs 
the transmission up between gears and it is not easy to get the transmission 
back into neutral.  Usually have to get under the truck and work the 
transmission arms with a screwdriver and sometimes a hammer- not good for 
the transmission.  To try and prevent that, I now ,when shifting out of 
reverse, move the stick bach and forth in neutral to make sure that the 
shifter has completely released the reverse arm.  A real pain.  I am going 
to look into getting a regular Hurst that attaches to the trans the way it 
is supposed to.  I think I have the clearance in the cab because I have a 
panel with bucket seats.

Hope this helps.


>From: "Antonio R. Tijerino" <antonio@tijerino.net>
>Reply-To: "Antonio R. Tijerino" <antonio@tijerino.net>
>To: "Oletrucks" <oletrucks@autox.team.net>
>Subject: [oletrucks] Saginaw 4-speed problems.
>Date: Sat, 10 May 2003 17:36:41 -0600
>
>I installed the Patrick's shifter on my 78-80 4-speed Saginaw transmission.
>The installation went pretty smooth, but the transmission is not shifting 
>to
>First or Second gear at all. I have no problems shifting to reverse and 3er
>and 4th. For those of you with experience with these type of trannies, What
>am I facing here? A simple internal shifting fork? or major damage?
>
>Thanks,
>
>Antonio
>'53 3100
>Eagle, ID
>oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959

_________________________________________________________________
MSN 8 helps eliminate e-mail viruses. Get 2 months FREE*.  
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959

<Prev in Thread] Current Thread [Next in Thread>