shop-talk
[Top] [All Lists]

Re: [Shop-talk] Floor Jacks

To: Mark <mark@nashvilletn.org>
Subject: Re: [Shop-talk] Floor Jacks
From: "David Scheidt" <dmscheidt@gmail.com>
Date: Sun, 9 Mar 2008 13:12:02 -0400
On Sun, Mar 9, 2008 at 12:44 PM, Mark <mark@nashvilletn.org> wrote:
>
>  Short of finding a successful solution, are there any suggestions for a good
>  jack.  I have found that there is at least one "MADE IN USA" jack made by
>  Hein-Werner, any experience with them?
>

The Hein-Werner is prety much the standard Lincoln or walker floor
jacks that used to be very common.   It's, I'm told -- I don't have
one, nor have I used one regularly -- a good jack.  The shops I've
worked in have had Norco jacks, which are great.  I've also used a
number of Milwaukee (not the same company as the power tools) jacks,
which are very well built (in Milwaukee, even), but are quite spendy.


-- 
David Scheidt
dmscheidt@gmail.com
_______________________________________________
Support Team.Net  http://www.team.net/donate.html


Shop-talk mailing list

http://autox.team.net/mailman/listinfo/shop-talk

http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>