shop-talk
[Top] [All Lists]

Re: [Shop-talk] pvc plumbing/cement question

To: Shop Talk List <shop-talk@autox.team.net>, scott.hall@comcast.net
Subject: Re: [Shop-talk] pvc plumbing/cement question
From: Doug Braun <doug@dougbraun.com>
Date: Tue, 26 May 2009 06:50:26 -0700 (PDT)
Arrange to have the water flow over a small paddle wheel and generator, and 
drain back into the pool.  You could use this setup to reduce or even eliminate 
your electric bill.

Doug

--- On Tue, 5/26/09, scott.hall@comcast.net <scott.hall@comcast.net> wrote:

> From: scott.hall@comcast.net <scott.hall@comcast.net>
> Subject: Re: [Shop-talk] pvc plumbing/cement question
> To: "Shop Talk List" <shop-talk@autox.team.net>
> Date: Tuesday, May 26, 2009, 8:00 AM
> I probably said that wrong. the cut
> ends of the plumbing are above the level of water in the
> pool. the pool is about as full as it always would be, and
> the pad area is just slightly above the deck of the pool.
> I'd say the cut ends of the plumbing are maybe six inches
> above the water level. I figure I must have some sort of
> siphon thing going on but I have no idea how. 
_______________________________________________
Support Team.Net  http://www.team.net/donate.html


Shop-talk mailing list

http://autox.team.net/mailman/listinfo/shop-talk

http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>