OK, I remember a long time ago there were some people that had X-10
knowledge, and since some of these devices are in my shop, it's shop
related. 8>)
Here is the problem...
I have a few locations that don't seem to work all the time. One is a
light switch (I changed out the X-10 switch to ensure it wasn't a faulty
unit.) No matter how I address that unit, it doesn't work. Even pressing
on the button ON THE SWITCH, it doesn't turn on or off about 80% of the
time.
then some times it works fine.
When it doesn't work, I have used remotes, "all unit off" devices, and the
button on the switch. This leads me to believe that it has to do with the
bulbs. But I don't know how to troubleshoot this issue any further.
Again, it works correctly about 20% of the time, so it's not a complete
failure.
I do have a "cross over" unit in my circuit breaker box, but the switch on
the device would rule out that as a problem.
Here is the switch type that I'm using...
http://www.x10.com/products/x10_ws467.htm
Moose
Everything I know about knots, I learned from Alexander the Great.
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Shop-talk mailing list
http://autox.team.net/mailman/listinfo/shop-talk
http://www.team.net/archive
|