shop-talk
[Top] [All Lists]

Re: [Shop-talk] Odd-shaped door?

To: Team shop-talk <shop-talk@autox.team.net>
Subject: Re: [Shop-talk] Odd-shaped door?
From: Brian Kennedy <kennedybc@comcast.net>
Date: Thu, 14 Jan 2010 07:03:38 -0800
Doug, if you don't need the 4'x7', it shouldn't be too hard to take a few
2x4s and frame it down to a standard door. Add a little insulation and
paneling (or dry wall if you want more work) and you're done. If you lived
near Ann Arbor, I'd give you a door and frame left over from my last
project.
Brian K


On 1/14/10 5:58 AM, "Doug Braun" <doug@dougbraun.com> wrote:

> Hello,
> 
> My basement (pretty conventional 70's construction) has a set of steps going
> out to the back yard, which are topped with a set of "Bilco" steel doors.
> They keep the rain out just fine, but they are pretty drafty and chilly in the
> winter.  I was thinking of installing an insulated door at the bottom of the
> steps.  The problem is that there is no built-in door frame, and the opening
> is about 4 feet wide by 7 feet high, and I have never seen doors of this shape
> being sold.
> 
> Has anybody ever seen a pre-built (or made-to-order) door that would be
> suitable?  Or would have to build the door frame and the door itself from
> scratch?  Looks, security, and weather resistance are not important, just
> sealing and insulating ability.
> 
> I guess I could build up something from lumber and plywood, but I am worried
> that it wold take a couple of iterations to get something that works
> reasonably well, is mechanically sound, and doesn't scream "Home Depot weekend
> project"...
> 
> Thanks,
_______________________________________________
Support Team.Net  http://www.team.net/donate.html

Suggested annual donation $12.96


Shop-talk mailing list

http://autox.team.net/mailman/listinfo/shop-talk

http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>