Not "Not so". I think I stated "cut from just one side" which implied 'like
a cutoff saw' or that "extra cuts" or working your way around the pipe or
hacking the pipe out in several pieces was not a viable option. If he can
get all the way around the pipe or is willing to take it out in pieces so he
can make room to get to the other side of the pipe then a wheel slightly
larger than the nut to hold it on the spindle would be all that is need.
-----Original Message-----
From: Randall
Sent: Friday, December 17, 2010 5:24 PM
To: shop-talk@autox.team.net
Subject: Re: [Shop-talk] cutting exhaust pipe
> as you would need a 7
> inch
> diameter wheel to cut all the way thru a 3 inch pipe from just one
> side.
Not so. Just takes a few extra cuts.
-- Randall
_______________________________________________
Shop-talk@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.96
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/shop-talk/arvidj@visi.com
_______________________________________________
Shop-talk@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.96
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|