[Shop-talk] 220V extension cord with breaker

[marka at maracing.com (Mark Andy)]

Howdy,

Back to the OP's question...

I think the way to do what you originally asked to do is per a previous 
response...

I.e. Run a 6 gauge flexible extention cord with a 50A plug from the 50A 
receptacle to a 30A breaker box mounted on your saw (like 
http://www.amazon.com/Midwest-U013C-30-Amp-Box-Breaker/dp/B00076WQE0, but 
check to see if there's a difference between 110vac and 220vac).

Plug the saw into that.

Now, there's absoultely no way in hell that I'd do that, rather than just 
putting a 50A plug on the end of the saw cord, but if you want to spend 
lots of money for some perceived vs. actual safety, go for it.

Mark