shop-talk
[Top] [All Lists]

[Shop-talk] generac generator won't start ???

Subject: [Shop-talk] generac generator won't start ???
From: dmscheidt at gmail.com (David Scheidt)
Date: Sun, 26 Jun 2011 23:47:47 -0500
References: <42CCD0344A5641D6B9A2E39B18A85BEB@john5043a2d406><4E07843B.9020106@frontier.com> <1E134B4BBEBA451C92CA46574E6FE614@john5043a2d406> <A95D09133E484A759D60502D12FDD532@EricJRussellPC> <4E07F832.1070302@hornesystemstx.com>
On Jun 26, 2011, at 10:25 PM, Pat Horne <pat at hornesystemstx.com> wrote:

> One easy way to test high current cables is to put a volt meter  
> across the ends of the cable. When large currents should be flowing  
> through the cable the voltage drop across the cable should be a volt  
> or two at most.

In car, (which this might as well be) anything over 0.5v is too much,  
unless there's a spec that says otherwise. For a startyrr  I like to  
see. <0.25v.

<Prev in Thread] Current Thread [Next in Thread>