Any of those methods will work. Paint stripper is probably the slowest but
safest (to the sheet metal). Sandblasting can warp sheet metal. A paint
stripping heat gun might be the best compromise.
Eric Russell
Mebane, NC
http://home.mebtel.net/~ejrussell
----- Original Message -----
> I will eventually sandblast the fender,
>
> Does methylene chloride paint stripper attack the stuff? How about
> burning
> it off?
_______________________________________________
Shop-talk@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.96
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|