[Shop-talk] Removing bondo

[ejrussell at mebtel.net (Eric J Russell)]

Any of those methods will work. Paint stripper is probably the slowest but 
safest (to the sheet metal). Sandblasting can warp sheet metal. A paint 
stripping heat gun might be the best compromise.

Eric Russell
Mebane, NC
http://home.mebtel.net/~ejrussell
----- Original Message ----- 

> I will eventually sandblast the fender,
>
> Does methylene chloride paint stripper attack the stuff?  How about 
> burning
> it off?