Re: [Shop-talk] Fence posts

[Jack Brooks via Shop-talk <shop-talk@autox.team.net>]

When I have a bad post, but the concrete is good, I yank the post, often in 
pieces, bit, by bit, plane down the new post so it fits easily, then pile up 
construction sand around the base of the post.  Wiggle it around for a few 
minutes and it'll lock in place.  In another month, with some rain, etc., it's 
like you put it in new concrete.

One back of sand should solve your issue.

Jack

-----Original Message-----
From: Shop-talk <shop-talk-bounces@autox.team.net> On Behalf Of Robert 
Nogueirao via Shop-talk
Sent: Sunday, March 15, 2020 9:12 PM
To: Shop Talk <shop-talk@autox.team.net>
Subject: [Shop-talk] Fence posts


Folks, I have a 4 foot high cedar wood fence in bad shape that I need to fix. 
While I will replacing the rails and pickets with new wood the posts appear to 
be in good condition,  ie: no rot, except for the fact they are set in concrete 
and the posts have shrunk a bit so the posts are loose on the concrete.
What would be the easiest way to firm up the posts in those holes? 
Iâ??m only looking for a fix that will last 5 or so years.
Bob Nogueira 
_______________________________________________

Shop-talk@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.96
Archive: http://www.team.net/pipermail/shop-talk http://autox.team.net/archive

Unsubscribe/Manage: 
http://autox.team.net/mailman/options/shop-talk/jibrooks@live.com

_______________________________________________

Shop-talk@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.96
Archive: http://www.team.net/pipermail/shop-talk http://autox.team.net/archive

Unsubscribe/Manage: 
http://autox.team.net/mailman/options/shop-talk/mharc@autox.team.net