Ingenious. My adjuster screw might be too far gone, but I'm going to clean
it out real good and lubricate it. Then, I'll try your suggestion and hope
that it works. I sure don't mind saving $25 (plus shipping!) on a new
adjuster!
----- Original Message -----
From: <A666K@aol.com>
To: <jmcneal@ohms.com>
Cc: <spitfires@autox.team.net>
Sent: Thursday, January 13, 2000 12:09 PM
Subject: Re: Rear drum off! New problem
>
> Hey Jeff & List;
> I came up with an easy sulotion for your problem, when I thoght of it I
did not know a special tool was available for rear drum adjustment, so thats
how it came about. Well anyway, here goes;
> what you need is:
> 1. An allen wrench of any size (the bigger the better,this is you levrage)
> 2. 1/4 inch drive socket that corrosponds to the size of the allen wrench
> What you do is:
> 1. Connect the short end of the allen wrench to the buissness end of your
socket. (they should fit, theyre the same size right?)
> 2. Hold your new combo-tool by the long end of the allen wrench.
> 3. The part of the socket that usually goes to your ratchet is what you
use to adjust the brake.
>
|